china ash slurry submersible pump factory

The slurry must be pumped from the absorber tank to the top of the spray tower where it is sprayed downwards as a fine mist to react with the upward moving flue gas. With pumping volumes typically in the range of 16,000 to 20,000 gallons of slurry per minute and heads of 65 to 110 feet, rubber lined slurry pumps are the optimal pumping solution.

The Difference Between Flushing And Quenching in Slurry Pump Seals

As wear is a function of speed, slurry pumps should be operated at the lowest possible speed; units typically run at 1,200 rpm or less. Often, direct coupling between the pump and a low-speed motor or other drive makes the most sense. On the other hand, many other applications favour gearboxes to meet the required speed and operating point. In services where variable flow rates are required, variable frequency drives are used to provide the necessary continuous speed variation.

Floor drainage

Slurry Pump

- Smaller, more efficient tank - Because the motor is cooled by the surrounding liquid, the submersible slurry pump can be started up to 30 times per hour, resulting in a smaller, more efficient tank.

If you find the broken AC hose is the hose from air conditioning evaporator to compressor. It is the suction AC hose, the hose size is #10, 1/2 inch as the inner diameter. It is the bigger hose in the whole car air conditioning system

Firstly, you should check and know which part of AC hose is broken. As there are many different parts in the whole car air conditioning system, the AC hoses are the connectors for these parts.