china warman slurry pump bearing assembly factories

Latest articles



Popular articles

Latest articles

Links

  • For the specification of galvanized wire, the galvanized wire produced by our factory can range from No.8 to No.22, which refers to the BWG standard, that is, from about 4mm to 0.7mm, which can basically cover the type required by the customer. As for the raw material of galvanized wire, normally, we use Q195 mild steel, and some factories will also use SAE1006 or SAE1008. The following is the zinc coating, for galvanized wire, this is very important, the general zinc coating is about 50g/m2 to 80g/m2, some customers need high zinc galvanized wire, zinc coating can reach 200g/m2 to 360g/m2. The tensile strength of galvanized wire is usually 350n/m2 to 800n/m2. Then there is the packaging specification of galvanized wire. The specifications of small rolls of galvanized wire are 50kg/ roll, 100kg/ roll and 200kg/ roll. Of course, there are large rolls of galvanized wire, the weight can reach 300kg/ roll or 800kg/ roll.

  • All steel wire components Master High galvanized chain link tennis court system for hot dip galvanizing and protection to ensure coating. The link used to attach the chain link structure between the frame terminals of the post is made of aluminum, resulting in maintenance-free security. Some units used in the tennis court system are made of pressed steel and cast iron for increased durability. The role of steel wire mesh in the external wall plastering is mainly a measure to prevent falling off from the point of safety. The role of anti-cracking is relatively small, because of the location of the problem;

  • Post time: 15-08-22
  • Post time: 28-01-23

  • 4, when the greenhouse special electric galvanized shaft wire from the well and winding to the roll, be sure to clean up the well fluid, mud sand and other things stuck on the wire, and also coated with protective oil.

  • 2. When the weather is too dry and humid, remember to blow dry the cage or move it to a place with heating to prevent dry crack damage.

  • QQ截图20221110105503

  • Stainless steel blade barbed wire production process is similar to galvanized blade barbed wire production process, usually according to the mold to determine the size of the blade.

  • 5, there are no special requirements: such as whether to shrink packaging.

  • The wide application of galvanized wire has brought great convenience to people’s production and life, but the production process of iron wire is not to be underestimated. In industrial production, the production process of galvanized wire should be strictly controlled to ensure the quality of galvanized wire.

  • When galvanized wire out of the light plating should be carried out light treatment. The bath temperature of galvanized wire should be controlled well. Galvanized wire, also known as hot dip zinc and hot dip galvanized, is an effective way of metal corrosion prevention, mainly used in various industries of metal structure facilities. It is to immerse the steel parts after rust removal into the molten zinc liquid at about 500℃, so that the surface of the steel member is attached with zinc layer, so as to play the purpose of anticorrosion.

  • Purpose of galvanized hexagonal net: building wall fixed, heat preservation, heat insulation

  • annealed

  • Hot dip galvanizing is in the hot melt zinc liquid dip plating, production speed, thick but uneven coating, the market allows the thickness of 45 microns, up to 300 microns above. It is dark in color, consumes more zinc metal, forms infiltration layer with base metal, and has good corrosion resistance. Hot dip galvanizing can be maintained for decades in outdoor environment. The protection of zinc coating on iron matrix has two principles: on the one hand, although zinc is more active and easy to oxidize than iron, but its oxide film is not as loose and compact as iron oxide. The dense oxide layer formed on the surface inhibits the further oxidation of zinc in the interior.
  • It is recommended to have a brush, comb or rake ready before bathing your dog; Shampoo, conditioner, shower gloves, tether, bath mat, floor drain lid, spray, towel and shower shower.

  • Post time: 14-06-22
  • Application: Building materials
  • Post time: 24-02-23

  • chicken

  • Large hexagonal net called stone cage net, stone cage net before delivery, must be folded into a simple surface, packed compression after delivery. Then put it into the right position to open, and then put the appropriate size of the stone into the cage, the lid tight, and then the various stone cage net and adjacent stone cage net tied up.

  • Hexagonal

  • (5) We can surfacing the parts with wear and other failures, so as to obtain the surface surfacing layer with deep penetration, smooth surface and excellent performance.
  • Zinc dipping time should be adjusted according to the thickness of wire diameter. The method of adjustment is the length of the distance between the lead screw on the zinc pot and the ceramic sinking roller. Thick wire diameter zinc dipping time should be long, fine wire diameter zinc dipping time should be short, zinc dipping length in the range of 2~3.5m, which is also to reduce the zinc consumption of steel wire galvanized, is an aspect of maintaining the uniformity of zinc layer.

  • cage

  • For example, if the barbed rope is used for circling, the cost per meter is only a few yuan. If the other products are used for circling, it may be more than ten or even 20 yuan. This is undoubtedly to increase the cost of users again, so the barbed rope is the most economical and affordable product for breeding cattle and sheep.

  • Most cattle netting is mechanically woven from highly malleable and corrosion-resistant mild steel wire or PVC coated steel wire. Several commonly used raw materials for the manufacture of cattle net are electrogalvanized wire, hot-dip galvanized wire, Galfan steel wire, ten percent aluminum zinc alloy steel wire and the new type of selenium chromium steel wire.

  • hot

  • At the time of production, the annealing wire will be processed according to the performance of the material. According to different needs, the degree of hardness and softness can be changed, which can make it have more advantages, reduce the consumption of metal and reduce the cost of production. In the use of the time does not need to carry out daily maintenance and maintenance, not only can save a lot of time, but also can reduce the cost, but also has good stability, strong corrosion resistance, greatly extend the service life.

  • Although to be able to reduce the cost of production, but the overall strength of the product will have a great lack, so in this case will also let it have a great strength drop. Of course, in the mall, the higher the intensity of the data in the production of the higher the implementation of norms, naturally there will be certain progress in the price.