ERIKS type GV (type C according to DIN) is equivalent to type M, but is a heavy-duty version with a double metal casing. This can be a useful solution with larger diameters in more demanding applications. There is also a version of this type with a dust lip; the GVST (type CS according to DIN).

Oil seals, which are also referred to as radial shaft seals, rotary shaft seals, grease seals, or fluid seals, are used to close the gaps between fixed and moving parts of mechanical equipment. They are put between moving and stationary mechanical parts to make sure that moisture, contaminants, corrosive materials, and abrasives don’t cause any damage to these parts.

What are Oil Seals?

Oil seals with outer metal cases may include finishes or treatments applied to the outer edge to aid in rust protection, identification, and sealing of scratches or imperfections in the housing bore. Common finishes applied to the outside edge of metal O.D. oil seals include plain (a bonding agent of usually a yellowish-green color), a color-painted edge, and a grinded-polished edge.

Classical oil seals consist of a metal housing that carries the dynamic sealing lip and provides the static sealing function. These are usually manufactured of elastomer material, such as ACM, Silicone or FPM. Further, since they are in contact with the surface of the rotating shaft, the lip is pressed onto the shaft surface by means of a spring ring.

Lubricant Amount - Seals will always perform best when lubricated, however in some machines there are more likely to be dry spells. For these cases, selecting a leather or PTFE seal will be beneficial, as both can operate with less lubrication than others.

In addition to their resilience, neoprene foam gaskets also provide excellent sealing properties. The foam material is compressible, allowing the gaskets to conform to irregular surfaces and create a tight seal. This sealing capability makes neoprene foam gaskets an effective solution for preventing leaks and ensuring the integrity of equipment and machinery.

contaminated with moisture or any other particle. But the same oil will only last for a month at 212 degrees Fahrenheit if it’s contaminated with little water. This is why the function of an oil seal is very evident whenever it’s used.

made of a yieldable resilient material having flat sealing faces and comprising two ring portions connected together by an annular portion substantially v-shaped in cross-section which may yield or expand as the mounting requires.