Անգլերեն

Հկտ . 31, 2024 14:21 Վերադառնալ ցուցակին

Maintenance and Usage Precautions for Submersible Slurry Pump



Submersible slurry pumps play an important role in multiple industrial fields. To ensure its continuous, efficient, and stable operation, the following are maintenance and usage precautions for submersible slurry pumps.

 

Maintenance and Upkeep of Submersible Slurry Pump       

 

Regular inspection and cleaning

Regularly check the cleanliness of the pump body and impeller to avoid the accumulation of debris and dirt, as these accumulations can have a negative impact on the pump's flow rate and head.

Clean the sediment inside the pump body and on the surface of the impeller to maintain its optimal working condition.

Bearing and seal inspection

Regularly inspect the wear of bearings and replace them promptly if any wear or damage is found to ensure the normal operation of the water pump.

Check the integrity of the seals to ensure no leakage. If there is a leak, the seal should be replaced immediately.

Lubrication and cooling

For bearings lubricated with lubricating oil, regularly check if the oil level is within the range indicated on the oil mirror, and add oil promptly if it is insufficient. And regularly clean and replace lubricating oil, it is recommended to do so once a year.

Submersible slurry pumps generate heat during operation, and it is important to ensure sufficient cooling water flows through the pump body to prevent overheating.

Electrical system inspection

Regularly check the insulation resistance of the motor to ensure it is within the specified range.

Check the integrity of cables and wiring to prevent short circuits or open circuits.

Long term shutdown treatment

If the սուզվող ցեխի պոմպ  is not used for a long time, it should be disassembled for rust prevention treatment and stored properly for future use.

 

Precautions for Using Submersible Slurry Pump        

 

Correct installation

The սուզվող ցեխի պոմպ should be installed vertically in the liquid, ensuring that the pump shaft is perpendicular to the horizontal plane.

Before installation, the integrity of the pump body and cables should be checked to ensure that there is no damage.

Start and Run

Before starting, ensure that the motor rotates in the correct direction.

Slowly open the outlet valve to avoid sudden opening causing pump body vibration.

During operation, close attention should be paid to the load condition and sound changes of the pump. If there are any abnormalities, the pump should be stopped immediately for inspection.

Prevent blockage

During use, large solid particles or flexible substances should be prevented from entering the pump body to avoid blocking the impeller flow channel or damaging the flow components.

A filter screen can be installed at the inlet to reduce the possibility of impurities entering the pump body.

Shutdown and maintenance

After shutdown, the inlet valve should be closed and the power should be cut off.

Regularly clean and inspect the pump body, and replace any worn or damaged parts in a timely manner.

 

In summary, the maintenance and usage precautions of submersible slurry pumps are crucial to ensure their continuous, efficient, and stable operation. By regular inspection and cleaning, bearing and seal inspection, lubrication and cooling, electrical system inspection, and long-term shutdown treatment, as well as proper installation, start-up and operation, prevention of blockage and shutdown, and maintenance precautions, the service life of submersible slurry pumps can be extended and their work efficiency can be improved.

 

As a company special in pump, our business scope is very broad . We have sump pump, ջրի պոմպ, rubber slurry pump , սուզվող ցեխի պոմպ , hydraulic slurry pump, centrifugal slurry pump , sand slurry pump, auxiliary slurry pump , metal slurry pump, dredge pump , oem fgd pump , փրփուր պոմպ and sewage drainage pump . The submersible slurry pump price in our company are reasonable . If you are interesting in our product welcome to contact us!

Կիսվել

Հաջորդ:

Վերջին նորություններ

Հկտ . 24, 2024 18:27 Վերադառնալ ցուցակին

Maintenance and Usage Precautions for Submersible Slurry Pump



 To ensure its continuous, efficient, and stable operation, the following are maintenance and usage precautions for submersible slurry pumps.

 

Maintenance and Upkeep of Submersible Slurry Pump 

Regular inspection and cleaning

Regularly check the cleanliness of the pump body and impeller to avoid the accumulation of debris and dirt, as these accumulations can have a negative impact on the pump's flow rate and head.

Clean the sediment inside the pump body and on the surface of the impeller to maintain its optimal working condition.

Bearing and seal inspection

Regularly inspect the wear of bearings and replace them promptly if any wear or damage is found to ensure the normal operation of the water pump.

Check the integrity of the seals to ensure no leakage. If there is a leak, the seal should be replaced immediately.

Lubrication and cooling

For bearings lubricated with lubricating oil, regularly check if the oil level is within the range indicated on the oil mirror, and add oil promptly if it is insufficient. And regularly clean and replace lubricating oil, it is recommended to do so once a year.

Submersible slurry pumps generate heat during operation, and it is important to ensure sufficient cooling water flows through the pump body to prevent overheating.

Electrical system inspection

Regularly check the insulation resistance of the motor to ensure it is within the specified range.

Check the integrity of cables and wiring to prevent short circuits or open circuits.

Long term shutdown treatment

If the սուզվող ցեխի պոմպ  is not used for a long time, it should be disassembled for rust prevention treatment and stored properly for future use.

 

Precautions for Using Submersible Slurry Pump 

 

Correct installation

The սուզվող ցեխի պոմպ should be installed vertically in the liquid, ensuring that the pump shaft is perpendicular to the horizontal plane.

Before installation, the integrity of the pump body and cables should be checked to ensure that there is no damage.

Start and Run

Before starting, ensure that the motor rotates in the correct direction.

Slowly open the outlet valve to avoid sudden opening causing pump body vibration.

During operation, close attention should be paid to the load condition and sound changes of the pump. If there are any abnormalities, the pump should be stopped immediately for inspection.

Prevent blockage

During use, large solid particles or flexible substances should be prevented from entering the pump body to avoid blocking the impeller flow channel or damaging the flow components.

A filter screen can be installed at the inlet to reduce the possibility of impurities entering the pump body.

Shutdown and maintenance

After shutdown, the inlet valve should be closed and the power should be cut off.

Regularly clean and inspect the pump body, and replace any worn or damaged parts in a timely manner.

In summary, the maintenance and usage precautions of submersible slurry pumps are crucial to ensure their continuous, efficient, and stable operation. By regular inspection and cleaning, bearing and seal inspection, lubrication and cooling, electrical system inspection, and long-term shutdown treatment, as well as proper installation, start-up and operation, prevention of blockage and shutdown, and maintenance precautions, the service life of submersible slurry pumps can be extended and their work efficiency can be improved.

As a company special in pump, our business scope is very broad . We have sump pump, ջրի պոմպ, rubber slurry pump , սուզվող ցեխի պոմպ , hydraulic slurry pump, centrifugal slurry pump , sand slurry pump, auxiliary slurry pump , metal slurry pump, dredge pump , oem fgd pump , փրփուր պոմպ and sewage drainage pump . The submersible slurry pump price in our company are reasonable . If you are interesting in our product welcome to contact us!

 

Կիսվել

Հաջորդ:

Վերջին նորություններ

Եթե ​​դուք հետաքրքրված եք մեր արտադրանքով, կարող եք ընտրել ձեր տեղեկությունները թողնել այստեղ, և մենք շուտով կապ կհաստատենք ձեզ հետ:


Սեղմեք Enter՝ որոնման համար կամ ESC՝ փակելու համար
hyArmenian
en_USEnglish afAfrikaans sqAlbanian amAmharic arArabic azAzerbaijani euBasque belBelarusian bn_BDBengali bs_BABosnian bg_BGBulgarian caCatalan cebCebuano zh_CNChina zh_TWChina (Taiwan) coCorsican hrCroatian cs_CZCzech da_DKDanish nl_NLDutch eoEsperanto etEstonian fiFinnish fr_FRFrench fyFrisian gl_ESGalician ka_GEGeorgian de_DEGerman elGreek guGujarati htHaitian Creole haHausa hawHawaiian he_ILHebrew hi_INHindi hmnMiao hu_HUHungarian is_ISIcelandic igIgbo id_IDIndonesian gaIrish it_ITItalian jaJapanese jvJavanese knKannada kkKazakh kmKhmer rwRwandese ko_KRKorean ckbKurdish kyKyrgyz loLao laLatin lvLatvian lt_LTLithuanian lbLuxembourgish mk_MKMacedonian mgMalgashi ms_MYMalay ml_INMalayalam mtMaltese miMaori mrMarathi mnMongolian my_MMMyanmar ne_NPNepali nb_NONorwegian nyNorwegian orOccitan psPashto fa_IRPersian pl_PLPolish pt_PTPortuguese pa_INPunjabi ro_RORomanian ru_RURussian smSamoan gdScottish Gaelic sr_RSSerbian stSesotho snShona sdSindhi si_LKSinhala sk_SKSlovak sl_SISlovenian soSomali es_ESSpanish suSundanese swSwahili sv_SESwedish tlTagalog tgTajik ta_INTamil tt_RUTatar teTelugu thThai tr_TRTurkish tkTurkmen ukUkrainian urUrdu ug_CNUighur uz_UZUzbek viVietnamese cyWelsh xhBantu yiYiddish yoYoruba zuZulu hyArmenian